1014D Oscilloscope - 2 in 1 Digital Oscilloscope DDS Signal Generator 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate Built-in 1GB Storage Space

1014D Oscilloscope - 2 in 1 Digital Oscilloscope DDS Signal Generator 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate Built-in 1GB Storage Space

Q: Is this powered by usb wall adapter? thus could be operated with usb battery pack?

I tried using a cheapo power brick (batteries) claiming 5V 2A output. When i turned on the 1014D with no probes attached, it displayed a substantial square-like signal. I immediately turned it off, and did not test further, not wanting to risk damage to the scope from improper power. When using the (correct) wall adapter that came with the product connected to AC, at power on I would see two horizontal lines indicating zero signal, which is correct. The square-like traces suggest that my battery pack is not well enough filtered (maybe there is some pulse-based voltage conversion inside the pack). Perhaps a better quality battery pack would work, maybe someone out there could comment on that. I should add that the 1014D running on its included adapter works great, happy with my purchase.

Q: what is the Operating voltage is it 220/60Hz or not supported

The scope uses a 5 volt wall transformer like the ones for cell phones. so you could just get a 220 volt to 5 volt wall unit.. hope this helps. ps. I'm very happy with this scope. Larry

Q: For the signal gnerator, what is the maximum allowable output current and/or power?

Output voltage is +/- 1.5 V. When shorting out, the voltage drops to ~ +/- 0.5 V

Q: How to calibrate the built-in signal generator?

add another external signal generator to compare signals and watch out for your probe settings X1 x10. you can adjust the probes via set screw. also compare probes (probes could be the fault signal). also you don't want to void the warranty by removing the scope cover.

4.2/5

Product ID: 628827842

Secure Transaction

⚡100MHz dual-channel bandwidth

💾1GB built-in storage

📈1GSa/s real-time sampling rate

Frequently Bought Together

FNIRSI 1014D Oscilloscope 2 in 1 Digital Oscilloscope DDS Signal Generator, 100X High Voltage Probe, 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate Built-in 1GB Storage Space

REXQualis Electronics Component Fun Kit w/Power Supply Module, Jumper Wire, 830 tie-Points Breadboard, Precision Potentiometer,Resistor Compatible with Arduino, Raspberry Pi, STM32

AstroAI Digital Multimeter Tester 2000 Counts with DC AC Voltmeter and Ohm Volt Amp Meter; Measures Voltage, Current, Resistance, Continuity and Diode, Blue

Description

⚙️ Elevate your signal game—where precision meets power!

SIGNAL MASTERY IN ONE DEVICE - Integrated DDS signal generator with 14 standard waveforms plus customizable chopping signals—your all-in-one testing powerhouse.
INSTANT INSIGHTS WITH ONE TAP - High-efficiency one-button AUTO trigger and cursor measurement deliver peak-to-peak and frequency data without the math hassle.
PRECISION AT THE SPEED OF LIGHT - Experience ultra-clear signal capture with 100MHz bandwidth and 1GSa/s sampling rate for flawless waveform analysis.
VISUALIZE COMPLEX SIGNALS LIKE A PRO - Lissajous graphic and FFT viewing functions let you decode amplitude, phase, and harmonic content effortlessly.
CRYSTAL CLEAR DISPLAY FOR SHARP FOCUS - 7-inch 800x480 HD LCD screen ensures every waveform detail pops, keeping you ahead in every project.

The FNIRSI 1014D is a professional-grade 2-in-1 digital oscilloscope and DDS signal generator featuring dual 100MHz bandwidth channels, a blazing 1GSa/s real-time sampling rate, and 1GB of built-in storage. Its intuitive one-button AUTO trigger, cursor measurement, and advanced visualization tools like Lissajous and FFT displays make complex signal analysis effortless, all showcased on a vibrant 7-inch HD screen.

Specifications

Manufacturer	FNIRSI
Part number	1014D
Item Weight	1.57 Kilograms
Product Dimensions	24.99 x 7.01 x 14 cm; 1.57 kg
Item model number	1014D
Shape	Rectangle
Item Package Quantity	1
Included components	Oscilloscope Host
Batteries Included?	No
Batteries Required?	No

Have a Question? See What Others Asked

Is this powered by usb wall adapter? thus could be operated with usb battery pack?

what is the Operating voltage is it 220/60Hz or not supported

For the signal gnerator, what is the maximum allowable output current and/or power?

How to calibrate the built-in signal generator?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Suresh K.

Very impressed with the quality and fast delivery. Will shop here again.

4 days ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

£368.47

Duties & taxes incl.

UKstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Fatima A.

Best international shipping I've ever tried. Worth every penny!

3 days ago

View all Trustpilot reviews

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

1014D Oscilloscope - 2 in 1 Digital Oscilloscope DDS Signal Generator 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate Built-in 1GB Storage Space

Description

Specifications

Have a Question? See What Others Asked

Common Questions